Converflex Solutions

 

 

Home News Consulting Equipment Consumables Enquiries Contact Us Search

 

 

 

Daco Solutions Turret Rewind Machinery

 

Daco Combi Turret Rewinder

The Daco Combi turret rewinder is the most flexible label turret rewinder / converting machine available today.  Its unique design of this turret rewinder allows for both inline and offline operation.  The 3 spindle turret rewinder offers quick change over times, which coupled with a touch screen HMI operator interface makes the turret rewinder both interactive and user friendly.

When used turret rewinder is inline the machine can be simply positioned at the end of any rotary label press, (no inter-linking is required), and with just an electrical and pneumatic supply it is ready for production.

Turret rewinders are at there most effective when small diameter rolls need to be rewound.  Label printers normally rewind on slitter / inspection rewinders but output is low due to the time it takes for the operator to remove the wound labels, apply new cores, attach the web and then bring the machine back up to speed.  By utilising a Daco turret rewinder you will be able to increase productivity significantly and reduce operator input.

The Daco Combi turret rewinder can also be used offline without any modifications, the turret has its own inbuilt unwind, vertical inspection / splice table with pneumatic web clamps, electronic web guide and quick make ready rotary slitting unit.

Daco Solutions are currently the only turret rewinder manufacturer to offer a turret rewinder capable of running both in-line and offline.

Standard Features

Touch screen HMI operator interface - Easy to use operator interface for fast job setups.
Mandrels - 76mm air operated mandrels for both the unwind and rewind.
Web guide - E & L electronic web guide with an ultrasonic sensor.
Slitting - Rotary scissor slitting with 3 knives, lateral adjustment and knife separation.
Counting - Label and metres.
Holt melt core gluing system - 5 glue transfer wheels.
Adjustable core positioning stop.
Automatic roll eject system with roll collection chute.
Adjustable splicing table with pneumatic web clamps.
Programmable end of roll - stops or slows the machine at a given roll diameter on the unwind.
Nip roller - Fully adjustable air operated silicon covered nip.
Taper tension control
 

Optional Equipment - Turret Rewinder

Hotmelt tail gluing
Air mandrels - 25 to 102mm (1 to 4")
Air assisted turn bar for labels in / labels out
Inter-label cutting
Additional slitting knives
Additional glue transfer wheels
 

Optional - Converting Module

Single rotary die station with matrix stripping tower. (10 - 24") repeats
Additional rotary die station - for perforating / sprocket punching (no matrix stripping)
Rotometrics RD scorer - enables edge trim to be wound with the waste matrix
Hydraulic die jacks with quick release for accurate pressure setting of the rotary die
2 die base (only fitted with a single die station)
Additional web guide
Die adaptors to utilise existing tooling - Edale, KDO, Mark Andy, Gallus and Nilpeter (others available upon request)

 

General Specification Millimetres Inches Metres Feet
Maximum roll diameter unwind 700 27.5    
Maximum roll diameter rewind 350 13.75    
Minimum slit width 16 0.62    
Lateral slitting knife adjustment +/- 8 +/- 0.31    
Maximum offline speed     150 492
Maximum inline speed     100 328
Cycle Time 20 Seconds
Air requirements 80 psi
Electrics 240 Volts, Single Phase, 16 Amp or to suit local requirements

 

The Daco 3 series inline turret rewinder

The Daco 3 series inline turret rewinder is a very flexible converting machine. The 3 spindle turret offers quick change over times, which coupled with a HMI operator interface makes the machine both interactive and user friendly.

When used inline the machine can be simply positioned at the end of any rotary press, (no inter-linking is required), and with just an electrical and pneumatic supply it is ready for production.

There is a host of optional equipment which enables you to specify a very adaptable converting line.

Web widths 330mm (13") or 410mm (16").
 

Standard Features

Touch screen HMI operator interface - Easy to use operator interface for fast job setups.
Mandrels - 76mm air operated mandrel for the rewinds.
Counting - Label or metres.
Holt melt core gluing system - 5 glue transfer wheels.
Adjustable core positioning stop
Automatic roll eject system with roll collection chute
Taper tension control
 

Optional Equipment

Hotmelt tail gluing
700mm diameter unwind
Rotary scissor slitting with 3 knives, lateral adjustment and knife separation.
Adjustable splice table
Air mandrels - 25 to 102mm (1 to 4")
Inter-label cutting
BST Electronic web guide
Air assisted turn bar for labels in / labels out

 

General Specification Millimetres Inches Metres Feet
Maximum roll diameter rewind 350 13.75    
Maximum inline speed     100 328
Cycle Time 20 Seconds
Air requirements 80 psi
Electrics 240 Volts, Single Phase, 16 Amp or to suit local requirements

 

 

For further information and product literature either lodge an Enquiry or visit Daco on the web at www.daco-solutions.com 

 

 

 

 

 

 

Send mail to info@converflex.com.au with questions or comments about this web site.
Copyright © 2005 Converflex Pty Ltd
Last modified: May 29, 2006