Daco Solutions
Inspection Slitter Rewinder
Daco DT250 Tabletop Slitter Rewinder
The Daco DT 250 tabletop slitter rewinder was introduced to the product range
of tabletop equipment by Daco Solutions in January 2002. Customers were
asking on a regular basis for a cost effective and simple to use label slitting
machine. Daco firmly believes that the DT 250 label rewinder fulfils this
role and includes a range of options to increase the flexibility of the slitter
rewinder further.
The Daco DT250 tabletop label slitter rewinders compact size and short web
path keeps wastage to a minimum, the silicon covered nip drive roller helps to
keep down time to a minimum as labels can not attach themselves to the roller.
The DT250 slitter rewinder has pneumatic independent control of both the unwind
and rewind tensions. Rotary slitting with on the run lateral adjustment is
fitted as standard and a splice table makes web splices both simple and quick.
Standard Features of the Daco DT250 Tabletop Label Slitter Rewinder
 | Mandrels - 76mm mechanical mandrels for both the unwind and rewind.
| Unwind - Pneumatic unwind brake with independent regulator and
gauge.
| Slitting - 3 quick set rotary scissor slitting knives with on the
run lateral adjustment. Removable interlocked cutter guard for easy
access to the knives and anvils.
| Rewind - Pneumatic rewind clutch with independent regulator and
gauge.
| Counting - Labels and Metres - with auto slow down and stop when
the count is reached.
| Splicing table - Makes web splicing easier and quicker.
| Nip roller - Fully adjustable silicon covered nip drive roller. |
| | | | | |
Optional Equipment (View
DT250 Tabletop Label Slitter Rewinder - optional equipment)
| E & L electronic web guide with an ultrasonic sensor
| Semi automatic 3 splindle turret rewinder with auto roll ejection
| Lateral knife separation (rotary slitting)
| Twin product rewinds
| Unwind backing disc
| Pneumatic web clamps for the splice table
| Air mandrel upgrade
| Labels in / labels out rewinding
| Razor slitting - with on the run lateral adjustment and a 10mm minimum
slit width
| Mechanical rewind mandrels - 38 to 102mm (1.5 to 4")
| Air mandrels - 25 to 102mm (1 to 4")
| Additional rotary slitting knives |
| | | | | | | | | | |
| General
Specification |
Millimetres |
Inches |
Metres |
Feet |
| Maximum web width |
254 |
10 |
|
|
| Maximum roll diameter
unwind |
450 |
18 |
|
|
| Maximum roll diameter
rewind |
360 |
14 |
|
|
| Minimum slit width |
16 |
0.62 |
|
|
| Lateral knife adjustment |
+/- 8 |
+/- 0.31 |
|
|
| Maximum speed per minute |
|
|
175 |
575 |
| Air requirements |
80 psi, 0.5
cfm |
| Electrics |
240 Volts,
Single Phase, 13 Amp or to suit local requirements |
Daco 'S' Slitter Rewinder
 The Daco 'S'
slitter rewinder is a cost effective and simple to use label slitting and
rewinding machine.
The machines compact size and short web path keeps wastage to a minimum, the
silicon covered nip drive roller helps to keep down time to a minimum as labels
can not attach themselves to the roller. The Daco 'S' slitter rewinder has
independent control of both the unwind and rewind tensions. The machine
utilises rotary slitting with on the run lateral adjustment is fitted as
standard and a splice table makes web splices both simple and quick.
An E & L electronic web guide with an ultrasonic sensor ensures that the
finished rolls are perfectly slit and rewound.
Pneumatic airshafts for both unwind and rewind means that changing the rolls
could not be simpler.
| Web widths 250mm (10") & 330mm (13")
| 710mm Inspection Table |
|
Standard Features of the Daco 'S' Slitting Machine
| Mandrels - 76mm air operated mandrels for both the unwind and
rewind.
| Unwind - 700mm diameter with Merobel electromagnetic particle brake
and taper tension control
| Web guide - E & L electronic web guide with an ultrasonic
sensor.
| Slitting - Rotary scissor slitting with 3 knives and lateral
adjustment.
| Rewind - Labels in / Labels out rewinding. Merobel
electromagnetic particle clutch.
| Counting - Labels and Metres with programmable slowdown and stop.
| Nip roller - Silicon covered adjustable nip.
| No roll-followers or external sensors to be adjusted or maintained.
| CE compliant |
| | | | | | | |
Optional Equipment
| Second rewind
| Lateral knife separation
| Adjustable splicing table - with pneumatic web clamps
| Razor slitting with lateral adjustment
| Crush cut slitting with 3 knives and lateral adjustment
| Air mandrels - 25 to 102mm (1 to 4")
| Additional rotary slitting knives |
| | | | | |
| General
Specification |
Millimetres |
Inches |
Metres |
Feet |
| Maximum roll diameter
unwind |
700 |
27.5 |
|
|
| Maximum roll diameter
rewind |
360 |
14 |
|
|
| Minimum slit width
(rotary) |
16 |
0.62 |
|
|
| Lateral slitting knife
adjustment |
+/- 8 |
+/- 0.31 |
|
|
| Maximum speed (per
minute) |
|
|
250 |
820 |
| Air Requirement |
80 PSI. |
| Electrics |
240 Volts,
Single Phase, 13 Amp or to suit local requirements |
Daco HSI Slitting / Inspection Machine
 The Daco HSI
slitting / inspection machine offers both flexibility and high performance.
The inspection / slitting machine's design includes a quick make ready rotary
scissor slitting box and touch screen HMI operator interface for quick and easy
job setup.
Both the rewind and unwind tensions are fully and independently adjustable
and has taper
tension control as standard. The unwind also has a programmable end of
roll function, which allows the operator to select an end of roll diameter.
The slitting machines electronic web guidance system ensures that the
finished rolls are perfectly wound, and an inspection table with adjustable
splicing table (with pneumatic clamps) is also fitted as standard, enabling
splices to be made both neatly and easily.
Pneumatic airshafts for both unwind and rewind means that changing the rolls
could not be simpler, and a web advance system makes it easy to attach the web
to the core when starting a new roll.
| Web widths 432mm (17") and 508mm (20") |
Standard Features of the Daco HSI Slitting Machine
| Unwind - 1m (40") unwind with 76mm air shaft, safety chucks,
& roll lift and taper tension control.
| Touch screen HMI operator interface - Easy to use operator
interface for fast job setups.
| Product Rewind - 76mm air operated mandrels with labels in / labels
out rewinding. Magnetic particle clutch, taper tension control.
| Web guide - automatic web guide with an ultrasonic sensor.
| Slitting - Rotary scissor slitting with 3 knives, lateral
adjustment and knife separation.
| Counting - Label, feet and metres with programmable slow down and
stop.
| Programmable web advance system - enables easy attachment of the
web to the core when starting a new roll.
| Programmable end of roll - stops or slows the slitting machine at a
given roll diameter on the unwind.
| Splicing table - With pneumatic web clamps makes web splicing
easier and quicker.
| Nip roller - Fully adjustable air operated silicon covered nip.
| Quick check
| No roll-followers or external sensors to be adjusted or maintained
| CE compliant |
| | | | | | | | | | | |
Optional Equipment
| Closed loop tension control.
| Missing label detection - 6 or 12 lane.
| Single or double sided anti static bars.
| Twin product rewinds with independent tension control and 600mm
(23.6") diameter.
| Layon roller for twin product rewinds.
| Razor slitting with lateral adjustment.
| Flag detection.
| Splice detection.
| Strobe light
| Air mandrels - 25 to 102mm (1 to 4")
| Differential rewind shafts
| Additional rotary slitting knives |
| | | | | | | | | | |
| General
Specification |
Millimetres |
Inches |
Metres |
Feet |
| Maximum roll diameter
unwind |
1000 |
40 |
|
|
| Maximum roll diameter
rewind |
360 |
14 |
|
|
| Minimum slit width
(rotary) |
16 |
0.62 |
|
|
| Lateral slitting knife
adjustment |
+/- 8 |
+/- 0.31 |
|
|
| Maximum speed (per
minute) |
|
|
250 |
820 |
| Air Requirement |
80 PSI. |
| Electrics |
240 Volts,
Single Phase, 13 Amp or to suit local requirements |
For further information and product literature either lodge an Enquiry
or visit Daco on the web at www.daco-solutions.com
| 
